Tips and tricks for removing ILC's Carrier

ILC thermoformable, performance caps achieve lamination bond during our manufacturing process but are designed to fully bond to the plastic substrate during the forming process. We recommend that care be taken when removing the protective carrier from the sheet. To assist in the process, our operators pop one corner of the carrier and mark it with a piece of tape. The carrier should be carefully removed from the taped/ “popped” corner. 

• Releasing carrier starting at taped corner of material
• Releasing carrier, releasing from one edge
• Releasing carrier, using a 45-degree angle approach

If you have questions about removing the carrier, please contact us for assistance.